Vessel
No. GT-P5XD 氣動螺絲刀 Oil Xtra 系列

我們開發了"Oil Extra"系列產品,在沖擊部件單元中填充油及空氣管排氣模型,旨在降低噪音和振動。
我們各種氣動螺絲刀,可實現高效率工作。

A wide variety of air screwdrivers for high efficiency work. We have developed products such as "Oil Extra" series which is filled with oil in the impact part unit, as well as air tube exhaust models, aiming at reducing noise and vibration.

No. GT-P5XD
氣動螺絲刀
沖擊機制充滿潤滑油。除了將沖擊聲變得更柔和,聲音更平滑,更防止因摩擦造成零件損壞。

Air Screwdrivers
The impact mechanism is filled with lubricating oil. In addition to changing the impact noise to a softer, smoother sound, the oil prevents part damage due to friction.
標準螺釘 4~5mm 緊湊,輕便,高轉速電機。用于回收設備,小框格框架等。
Standard screw 4~5mm Compact, lightweight and high revolution motor. For recycle plant, small sash frame, etc.
No. GT-S4.5XD
鉆頭套筒固定器
Bit sleeve retainer
降噪器
Noise reducer
No. GT-PLXD
鉆頭套筒固定器
Bit sleeve retainer
調整刻度盤
Adjust dial
降噪器
Noise reducer
No. GT-PLIXD
鉆頭套筒固定器
Bit sleeve retainer
調整刻度盤
Adjust dial
用空氣管抑制噪音
Suppress noise with air tube
降噪器
Noise reducer
No. GT-P4.5XD
鉆頭套筒固定器
Bit sleeve retainer
降噪器 / 后排氣
Noise reducer / Rear exhaust
No. GT-P5XD NEW
鉆頭套筒固定器
Bit sleeve retainer
降噪器 / 后排氣
Noise reducer / Rear exhaust
 
標準螺釘 5~6mm 穩定的緊固性能和高功率。用于建筑,外墻,住宅建筑等的框格框架。
Standard screw 5~6mm Compact, Stable tightening performance with high power. For sash frame for building, exterior, home building, etc.
No. GT-S6LXD
鉆頭套筒固定器
Bit sleeve retainer
調整刻度盤
Adjust dial
降噪器
Noise reducer
No. GT-P6LXD
鉆頭套筒固定器
Bit sleeve retainer
降噪器 / 后排氣
Noise reducer / Rear exhaust
No. GT-P5XD 氣動螺絲刀 Oil Xtra 系列

我們開發了"Oil Extra"系列產品,在沖擊部件單元中填充油及空氣管排氣模型,旨在降低噪音和振動。
我們各種氣動螺絲刀,可實現高效率工作。

A wide variety of air screwdrivers for high efficiency work. We have developed products such as "Oil Extra" series which is filled with oil in the impact part unit, as well as air tube exhaust models, aiming at reducing noise and vibration.

No. GT-P5XD
氣動螺絲刀
沖擊機制充滿潤滑油。除了將沖擊聲變得更柔和,聲音更平滑,更防止因摩擦造成零件損壞。

Air Screwdrivers
The impact mechanism is filled with lubricating oil. In addition to changing the impact noise to a softer, smoother sound, the oil prevents part damage due to friction.
標準螺釘 4~5mm 緊湊,輕便,高轉速電機。用于回收設備,小框格框架等。
Standard screw 4~5mm Compact, lightweight and high revolution motor. For recycle plant, small sash frame, etc.
No. GT-S4.5XD
鉆頭套筒固定器
Bit sleeve retainer
降噪器
Noise reducer
No. GT-PLXD
鉆頭套筒固定器
Bit sleeve retainer
調整刻度盤
Adjust dial
降噪器
Noise reducer
No. GT-PLIXD
鉆頭套筒固定器
Bit sleeve retainer
調整刻度盤
Adjust dial
用空氣管抑制噪音
Suppress noise with air tube
降噪器
Noise reducer
No. GT-P4.5XD
鉆頭套筒固定器
Bit sleeve retainer
降噪器 / 后排氣
Noise reducer / Rear exhaust
No. GT-P5XD NEW
鉆頭套筒固定器
Bit sleeve retainer
降噪器 / 后排氣
Noise reducer / Rear exhaust
標準螺釘 5~6mm 穩定的緊固性能和高功率。用于建筑,外墻,住宅建筑等的框格框架。
Standard screw 5~6mm Compact, Stable tightening performance with high power. For sash frame for building, exterior, home building, etc.
No. GT-S6LXD
鉆頭套筒固定器
Bit sleeve retainer
調整刻度盤
Adjust dial
降噪器
Noise reducer
No. GT-P6LXD
鉆頭套筒固定器
Bit sleeve retainer
降噪器 / 后排氣
Noise reducer / Rear exhaust
型號
Model No.
容量
Capacity
(mm)
無負載速度
No Load Speed
(rpm)
耗氣量
Air Consumption
(m3/min)
軟管接頭
Hose Coupling
總體長度
Overall Length
(mm)
重量
Weight
(g)
配件EDP No.
標準螺釘
Standard Screw
自攻螺釘
Tapping Screw
木螺釘
Wood Screw
螺栓
Bolt
 
GT-S4.5XD4.0~5.03.5~4.02.7~3.54.0~5.014,5000.2 G 1/4 188 585A14 ⛒2X65G BPN-2F 311085
GT-P4.5XD4.0~5.03.5~4.02.7~3.54.0~5.014,0000.2 RC 1/4 170 735A14 ⛒2X65G BPB-2 311089
GT-PLXD 4.0~5.03.8~4.23.3~3.84.0~5.011,0000.35G 1/4 198.5670A14 ⛒2X65G BPN-2F 311113
GT-P5XD 4.0~5.03.5~4.03.3~3.84.0~5.011.0000.33RC 1/4 172 790A14 ⛒2X65G BPB-2 311100
GT-PLIXD 4.0~5.03.8~4.23.3~3.84.0~5.07.300 0.29G 1/4 198 740A14 ⛒2X65G BPN-2F Tube fitting PLB-O2 311114
GT-S6LXD 5.0~6.04.0~4.53.6~4.15.0~6.012,0000.4 G1/4 212 815A14 ⛒2X65G BPN-2F 311115
GT-P6LXD 5.0~6.04.0~4.53.6~4.15.0~6.012.5000.45RC 1/4 184 876A14 ⛒2X65G BPB-2 311116
  • Air pressure: 0.6MPa *Air hose diameter: 6.35mm *Overall length and Weight: Accessories not included.
  • Capacity is listed as instant reference and depends on operation conditions.
  • w/Rotary parts oil (VG-10). Impact parts oil (VG-32)
日本的標準型
以下選項可用
S4.5XD
P4.5XD
PLXD
S6LXD
P6LXD
P5XD
日本的標準型
 
 
以下選項可用
S4.5XD
P4.5XD
PLXD
S6LXD
P6LXD
P5XD

標準螺釘 4~5mm 標準螺釘 5~6mm 標準螺釘 6~8mm 標準螺釘 8~10mm 標準螺釘 5~6mm 標準螺釘 2.6~3.5mm 標準螺釘 3.5~4.5mm 標準螺釘 3~4mm 標準螺釘 4~5mm 標準螺釘 5~6mm 標準螺釘 4~5mm 標準螺釘 6~8mm 標準螺釘 8~10mm 標準螺釘 2~2.5mm 標準螺釘 2.2~3mm 標準螺釘 3~4mm 標準螺釘 2.5~3mm 標準螺釘 3~4mm 標準螺釘 4~5mm 標準螺釘 4.5~6mm
緊湊,輕便,高轉速電機。用于回收設備,小框格框架等。 穩定的緊固性能和高功率。用于建筑,外墻,住宅建筑等的框格框架。 強大的扭矩力,用于安裝零件,緊固混凝土螺釘等。 用于施工高功率型號。 減速型氣動螺絲刀 緊湊,輕巧,靜音的齒輪減速機制。 穩定的緊固性能和高功率。用于安裝電氣部件。 小巧輕便。裝配廠的基本型號。 角度沖擊螺絲刀。 強大的扭矩力。出色的耐用性 高功率型號。 用于安裝各種零件。 當扭矩達到設定值時,空氣自動關閉。 結合了沖擊和扭矩控制系統提供了出色的可操作性。
No. GT-S4.5XD
No. GT-P4.5XD
No. GT-S6LXD
No. GT-P60XD
No. GT-P80XD
No. GT-P6EXD
No. GT-H4RC
No. GT-H5RC
No. GT-H4R
No. GT-H5R
No. GT-S4.5DR
No. GT-P5LS
No. GT-PLHⅡ
No. GT-P6HS
No. GT-PLRC
No. GT-S6.5D
No. GT-P8D
No. GT-S4TFG
No. GT-S4TFS
No. GT-S4TFR
No. GT-S5TFG
No. GT-S5TFB
No. GT-S5TFR
No. GT-S5TS
No. GT-PLXD
No. GT-P5XD
No. GT-P6LXD
No. GT-S60XD
 
No. GT-H4PR
No. GT-H5P
No. GT-P4.5DR
No. GT-PLP
No. GT-P6LSⅢ
No. GT-S6MLR
 
No. GT-P6.5D
 
No. GT-S4TG
No. GT-S4TS
No. GT-S4TR
No. GT-S5TG
No. GT-S5TB
No. GT-S5TR
 
No. GT-PLIXD
No. GT-PLR
No. GT-PLZ
No. GT-S6HS
 

?